1.5x10M Compound Fertilizer Vibratory Fluid Bed Drying Machine

Vibrating fluid bed dryer is widely used for operation of drying, cooling and damp increasing (or carry out at the same time) for powder or granule materials. Material is fed into the machine from feeding inlet, and moves forward continuously along with the level of fluid bed under the action of vibration force. Hot air passes through fluid bed and carries out heat exchanging with damp material. Then the damp air is exhausted out by exhaust fan, some fine powder is collected by cyclone separator and dust remover, and dried product is discharged from discharging outlet.

Fluid Bed Dryer Working Principle

The material enters the machine from the feed port. Under the action of vibration, the material is thrown along the

horizontal fluidized bed and moves forward continuously. After the hot air passes through the fluidized bed and exchanges heat with the wet material, the wet air passes through the cyclone separator to remove dust. It is discharged from the exhaust port, and the dry material is discharged from the discharge port.

Fluid Bed Dryer Charactaristics

Quick-open structure will be adopted in it, the upper bed can be moved easily and it is convenient for cleaning.
The bed board was made with laser punching technology, it effectively avoid deformation by common punching technology.
The lower bed is supported by stainless steel seamless tube. It’s more strong.
Raw material is heated evenly and heat exchange is fully used and dry capacity is high. Compared with ordinary dryer ,the energy can be saved about 30%.
The vibration is created by motor. It is stable in operation and convenient in maintenance, low noise and long life.
The fluidized state is stable and no dead angle and phenomenon of broken out.
It is good in regulation and wide in suitability. The thickness and moving speed in the machine and the amplitude change speed of the material can be steeples regulated.
It is small for damaging the surface of raw material. The machine can be used for drying materials that are easy broken. The drying effect can not be affected even materials gave anomalous shape.
It is effective to prevent from cross pollution between raw material and air because the equipment adopts fully closed structure. So that keeps the environment clean.

Fluid Bed Dryer Technical Parameters

Model	A	B	C	D	E	F	Weight(kg)
VFBD-3x0.3	3000	300	1350	900	430	1650	1250
VFBD-4.5x0.3	4500	300	1350	900	430	1650	1560
VFBD-4.5X0.45	4500	450	1550	950	430	1700	1670
VFBD-4.5X0.6	4500	600	1650	950	430	1700	1910
VFBD-6x0.45	6000	450	1650	950	430	1700	2100
VFBD-6x0.6	6000	600	1700	1000	500	1700	2410
VFBD-6x0.75	6000	750	1850	1000	600	1850	2340
VFBD-6x0.9	6000	900	2000	1000	600	1850	3160
VFBD-7.5x0.6	7500	600	1850	1000	600	1850	3200
VFBD-7.5x0.75	7500	750	2000	1000	600	1850	3600
VFBD-7.5x0.9	7500	900	2100	1000	600	1850	4140
VFBD-7.5x1.2	7500	1200	2500	1150	800	2050	5190
VFBD-7.5x1.5	7500	1500	2850	1570	800	2370	6426
VFBD-8x1.8	8000	1800	3250	1800	900	2700	8600

Model	Area of fluidized bed(M2)	Inlet air temperature(oC)	Outlet air temperature(oC)	Water evaporation(kg/h)	Vibration motor model	Vibration motor power
VFBD-3x0.3	0.9	70-140	40-70	20-35	YZS8-6	0.75x2
VFBD-4.5x0.3	1.35			35-50	YZS10-6	0.75x2
VFBD-4.5X0.45	2.025			50-70	YZS15-6	1.1x2
VFBD-4.5X0.6	2.7			70-90	YZS15-6	1.1x2
VFBD-6x0.45	2.7			80-100	YZS15-6	1.5x2
VFBD-6x0.6	3.6			100-130	YZS20-6	1.5x2
VFBD-6x0.75	4.5			120-170	YZS20-6	2.2x2
VFBD-6x0.9	5.4			140-170	YZS30-6	2.2x2
VFBD-7.5x0.6	4.5			130-150	YZS30-6	2.2x2
VFBD-7.5x0.75	5.625			150-180	YZS40-6	3.0x2
VFBD-7.5x0.9	6.75			160-210	YZS40-6	3.0x2
VFBD-7.5x1.2	9.0			200-280	YZS50-6	3.7x2
VFBD-7.5x1.5	11.25			230-330	YZS50-6	3.7x2
VFBD-8x1.8	14.4			290-420	YZS75-6	5.5x2

Fluid Bed Dryer Application

Pharmaceutical and chemical industries: All kinds of press tablet and granules, boric acid, borax, dihydroxybenzene, malic acid, maleic acid and so on.

Foodstuff industry: Distiller’s grains, monosodium, edible salt, mine residue, bean seed, mushroom essence, chicken essence, desiccated coconut and so on.

Fluid Bed Dryer Flow

Fluid Bed Dryer Show

Contact Me

Jiangsu Guojin Drying Technology Co.,Ltd. specializes in the research and development and manufacture of drying, mixing, granulating, crushing, conveying, screening and other equipment. It has now become a large-scale enterprise in the drying equipment industry and a designated production enterprise of China Chemical Equipment Corporation. Especially, it has unique advantages in mesh belt type, hollow blade, disc type, rake type, fluidized bed, flash evaporation, airflow, spray, vacuum drying equipment, calcination, etc. Widely used in chemical, pharmaceutical, food, environmental protection, building materials, electronics, feed and other industries. Tens of thousands of users are spread all over the country and sold to more than then countries.

The company is located in Sanhekou Development Zone, Tianning District, Changzhou City, the birthplace of China's drying equipment industry. It is adjacent to Beijing-Shanghai Expressway, Shanghai-Nanjing Railway and Hengshan Crossing of Shanghai-Nanjing Expressway, 5km away from Shanghai in the east, Wuxi and Suzhou in the south, and the Yangtze River in the north.

The company has complete processing equipment. There are several sets of manufacturing equipment such as lifting, welding and cutting. It has excellent product development environment and production environment. The company has adopted advanced management methods and established a perfect quality assurance system.

Our company has established a set of perfect after-sales service system, which tracks and monitors all ex-factory products and the users are satisfied. "work with great care and keep improving" is the company's requirement for emplyees. Facing the increasingly standardized domestic and foreign markets, the company adheres to the corporate philosophy of "open competition, cooperative innovation, balance of interests and common development" and faces up to challenges with the belief of winning.