1. High efficient jet imported.2. LCD touch screen displays temperature, airflow, air pressure,
pump speed and jet cleaner frequency.
3. Auto controlling: one touch on/off, once processing parameters
are set, peristaltic pump will be auto started;
screen displays animation of the whole process of experiment.
4. Manual controlling is available, be able to adjust technical
parameters during the process of experiment.
5. With jet cleaner (stylet), its frequency can be automatically
adjusted.
6. Power off thermal-protection, push off button and the equipment
will stop at once, except draught fan, make sure equipment won't be
burned out by incorrect operation (Forcibly shut fan).
7. Spray chamber, cyclone separator, and receiving tank are all
made of transparent heat-resistant high-borosilicate glass; it
creates a no-pollution environment for the drying process. All the
spare parts are easy to install and wash.
8. Build in oil-free air compressor. The sound is low than 60db,
and following the GMP standards.
9. Two-flow spray atomizing structure, whole machine is made of
high quality stainless steel, compact design no
accessory equipment is needed.
10. Use PID controller, the accuracy of heating temperature is
around±1°C.
11. A filter has been equipped to the inlet unit to prevent the
sample from contamination.
12. The self-priming peristaltic pump delivers the sample liquid
from a container through a small diameter jet into the main chamber
to avoid secondary pollution. To make sure the process conducted
steady and smoothly.
13. Narrow size distribution, more than 95% of the dry powders are
in the same range of particles.
14. Automatic jet cleaner (stylet) prevents the jet from becoming
blocked and variably controlled.
15. Innovative tower wall purging device, improves the material
recycling rate.
